2000-2002 BMW Z3 Roadster Front Seats / Sand Beige Oregon Leather / Z3015

2000-2002 BMW Z3 Roadster Sand Beige Oregon Leather Seats / Pair. Removed from a 2000 BMW Z3 2.3 Roadster with the Sand Beige Oregon Leather interior option. These are the "normal" seats and were the standard seat offering for the roadster models. These seats are equipped with 4 way power operation and seat heaters. If your vehicle is not equipped with these options, you may need to modify the seat wiring harnesses for installation. Includes both the driver and passenger seats as shown. In good physical condition with no rips or tears in the leather. There is some heavier wear and warping, mostly on the driver side bolster and lower cushion. There is a couple of scuffs and scratches on the back side of the seats as shown in the photos. The driver left side bolster has some heavier warping / wear in the foam. Includes the plastic trim panel and seat controls, however the driver side is cracked as shown. There is some small picks in the top section of the seats leather over the headrest. In good working condition, fully tested prior to removal from the vehicle. The plastic trim does have some cosmetic wear and light scratching. The passenger side seatbelt trim is cracked, as shown. This can easily be swapped if your existing trim is in better condition. Does NOT include the seat belt pretensioner or power seat rails. You will need to reuse some of your existing components for installation. This style seat was not offered in the Coupe models, however they may still fit into coupe and earlier roadster models with some modifications to the mounts and wiring harness. These seats will ship in two separate boxes with the plastic control trim removed. The trim panel can be reinstalled using just a Phillips head screwdriver.

**BMW changed the seat wiring harness design sometime during the 1999 model year. This seat has the later style wiring harness connectors (large single yellow connector). If you are purchasing these for an earlier year vehicle, you may need to purchase a harness adaptor or modify your existing harness for these seats to work in your vehicle. Please do your research regarding the wiring specifics prior to purchase.**

Fits:

2000, 2001, 2002 BMW Z3 Roadster (w/ sand beige interior, w/ heated seats) - Verify Wiring)

z4015

ad