2000-2002 BMW Z3 Roadster Recovered Sand Beige Leather Seats / Z3026

2000-2002 BMW Z3 Roadster Recovered Sand Beige Leather Seats

Donor Car:

2001 BMW Z3 2.5i Roadster - 94K

Physical Condition:

Includes the driver and passenger seats as shown. These appear to have been previously recovered with an aftermarket leather as shown. The color match is is fairly accurate to the factory Sand beige interior trim. In good physical condition with no major rips or tears in the leather. Free of any major deformation or warping in the seat foam. The side trim front mounts have broken, which is common on these. Does NOT include the seat belt pretensioner or power seat rails. You will need to reuse some of your existing components for installation.

Cosmetic Condition:

In good overall cosmetic condition however there is some heavier sun fade in the edge of the seat on the drivers side as shown. There is also some typical dark spots and wear in the leather from use, as shown. The passenger belt guid is damaged, which is common on these. There may be spots or wear that is difficult to see in the photos.

Fits:

2000, 2001, 2002 BMW Z3 Roadster (w/ Sand Beige Classic Leather interior, w/o heated seats, Verify Wiring)

Fitment Notes:

These are the "normal" seats and were the standard seat offering for the roadster models. These seats are equipped with 4 way power operation only. If your vehicle is not equipped with these options, you may need to modify the seat wiring harnesses for installation.

BMW changed the seat wiring harness design sometime during the 1999 model year. This seat has the later style wiring harness connectors (large single yellow connector). IF you are purchasing these for an earlier year vehicle, you may need to purchase a harness adaptor or modify your existing harness for these seats to work in your vehicle. Please do your research regarding the wiring specifics prior to purchase.