Description
2006-2013 Chevrolet C6 Corvette Grand Sport Z06 Wide Body Rear Quarter Panel Conversion Kit
Donor Car:
2011 Chevrolet C6 Corvette Grand Sport - 10K
Crystal Red Metallic Tintcoat 89U
Physical Condition:
Includes the driver and passenger side rear quarter panels, fender arches, and ducts as shown in the photos. In good physical condition with no major cracks or damage. All major mounting tabs are fully intact. Each duct has one damaged clip retainer, and one holding pin is broken as shown.
Cosmetic Condition:
In good used cosmetic condition with no major fading, discoloration, or wear in the finish. Free of any deep scratches or heavy fading. One panel finish has some chipping as shown in the photos. These panels have sections which have PPF applied, which may be removable. There is also some typical light scratches, chips and swirls in the finish, which may be difficult to see in some photos.
Fits:
2010, 2011, 2012, 2013 Chevrolet C6 Corvette Grand Sport Coupe(direct replacement)
2009, 2010, 2011, 2012, 2013 Chevrolet Corvette C6 ZR1 Coupe (direct replacement)
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 Chevrolet Corvette C6 Z06 Coupe (direct replacement)
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 Chevrolet Corvette C6 Base Coupe (upgrade, may require modifications)
Fitment Notes:
Removed from a 2011 Grand Sport model so these have wider rear arches as shown. These can be used as an upgrade for the narrow base mode coupes. there may be some additional hardware and trim necessary to complete this upgrade, please do your research regarding this upgrade prior to purchase. Will ONLY fit the coupe models.
Includes the following components:
Driver rear quarter panel - 22813570 Passenger rear quarter panel - 22813553
Driver mud flap trim -15818637 Passenger mud flap trim - 15818636
Driver wheel liner - 15874589 Passenger wheel liner - 15874588
Driver brake vent duct - 15842372 Passenger brake vent duct - 15842373
Fuel door - 20978682
***Please Read Shipping Details Below***
This item will ship on a pallet via Fedex Freight to the Continental 48 States, Mexico and Canada. Please add the item to the cart to see the exact shipping costs associated with it. There will be two options for shipping, one without a liftgate equipped truck and one with a liftgate. If you have a business address with a loading dock, forklift or other means of unloading the pallet off of the delivery truck you will not need a liftgate equipped truck for delivery. If you have a residential address or are unsure about unloading the pallet from the truck please refer to the weight of the shipment above on this listing page, so you can make the decision on whether you will need a liftgate or not. For residential deliveries Fedex will contact you, at the phone number provided, to schedule an appointment for delivery. As with all freight companies they deliver to the curb, not inside, so please plan accordingly for your delivery.